|
 | PowerEdge M520 /2 Intel® Xeon® E5-2470 2.3 GHz
Network Server
IBM | 05 Jun 2012
137713 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 1 for SUSE® SLES 11 |
Product Description
More information please visit dell.com
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | A00 |
| BIOS/uEFI: | 1.0.0 |
| CPU: | 2 Intel
Xeon® Processor E5-2470 2.30 GHz |
| RAM: | 384 GB |
| Ports and Bus Types: | 2 USB Ports |
| Video Adapter: | Matrox®
MGA G200eR |
| Host Bus Adapter: | Intel
BD82C602J PCH
, Serial ATA (SATA) |
| Hard Disk Drive: | Seagate®
ST9500620NS 500GB SATA
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.1.0-33.2 |
Config Notes
- Install: System installed using an external USB DVD drive; the OS was installed from DVD using the UEFI boot loader and system configuration.
- Kdump (SLE12SP3): the crash kernel reserved memory parameters were increased from the default to crashkernel=256M,high crashkernel=256M,low using YaST.
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200eR |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 04-Feb-2012 | Driver Size: 190688 |
| | Checksum: 9ec99a5b6850be782df01c0b7663d67f |
|
| 2 Broadcom®
BCM5720 dual-port PCI Express® GbE Network Interface Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 223384 |
| | Checksum: 76a70bfcec58d2d10d9514f1d2ec4a86 |
|
| Intel
BD82C602J PCH |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 52464 |
| | Checksum: 8e7f557e5cfe98455deef90148417821 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|