|
 | ETERNUS DX90 S2
Storage Area Network (SAN) Device
Intel Corporation | 03 Nov 2011
136333 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 1 for SUSE® SLES 11 |
Product Description
ETERNUS DX90 S2 is an affordable disk storage system for small and midsize environments. ETERNUS DX90 S2 scales flexibly up to 240 disk drives. Different 2.5 inch, 3.5 inch, SAS, Nearline SAS, SSD drive types are supported even in mixed configurations, to enable efficient implementation of a tiered storage environment. Non-disruptive capacity upgrades are possible just by adding disks or complete enclosures. Data-in-place upgrades lead seamlessly to the next higher ETERNUS DX400 S2 series.
Customers can choose from FC, FCoE, iSCSI, or SAS, host interfaces which can be flexibly changed during the lifecycle. The new FCoE 10Gbit/s interface enables future-proof infrastructure convergence. For simultaneous connection to different network types ETERNUS DX90 S2 can operate interfaces in a mixed configuration. Remote copy of ETERNUS DX90 S2 to a second storage device (ETERNUS DX90 S2 / DX400 S2 series / DX8000) protects valuable data assets against site outages.
For more information please refer to: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/
Tested Configuration:
| Host Bus Adapter: | 2 Intel
Pro/1000 PCI-E
, iSCSI |
| Test Kit: | DiskKit 5.01.38 - 2010-07-20 |
Product File Specifications
| | | | | |
| | File Name: libiscsi.ko | File Version: -1 |
| | File Date: 18-Mar-2011 | File Size: 62640 |
| | Checksum: 9f506e0b92ab11e169178fa9a623834b |
| |
File URL: |
| | File Name: scsi_transport_iscsi.ko | File Version: 2.0-724 |
| | File Date: 18-Mar-2011 | File Size: 68144 |
| | Checksum: 78542d95812e35a11b93338ffbac423e |
| |
File URL: |
| | File Name: iscsi_tcp.ko | File Version: -1 |
| | File Date: 18-Mar-2011 | File Size: 46640 |
| | Checksum: 3567b158f5919c01d5af6e2d2101c0d0 |
| |
File URL: |
Config Notes
- The PLDP compliant LAN driver used during testing was installed from the following rpms: intel-e1000e-1.2.20-1.x86_64.rpm. These drivers can be downloaded and installed after the SLES install. To obtain the driver go to: http://drivers.suse.com/driver-process/pub/update/Intel/sle11sp1/common/x86_64/
- The SM712 video driver comes from Intel web site (S1200BTS on-board video driver)http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20001&lang=eng Please follow the steps below to install the driver: 1. Click Download to download the file
smi-xserver-sm712-intel-2010119-R1.zip, choose I accept
when the pop window occur. 2. Unzip the file. 3. Copy the smi-xserver-sm712-intel.tgz to the SUT. 4. Unzip the file with
command tar zxvf smi-xserver-sm712-intel.tgz. 5. Enter the directory: cd smi-xserver-sm712/sles11.1_64bit/ (this is for SLES11SP1 64bit. For i586, please use sles11.1_32bit instead). 6. Execute command : ./install. 7. After installation complete, type command init 3. 8. Put in the user name and password when enter the CLI interface. 9. Then input init 5 to enter the GUI interface again. Then the driver can be successfully installed.
|
Adapters and Drivers
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Intel Corporation
Columbia Design Center
100 Center Point Circle, Suite 200
Columbia
, SC
29210
Voice: 803-216-2100
Website: www.intel.com
|