|
 | ETERNUS LT40 S2 LTO4 FH SAS
TAPE DRIVE
Fujitsu | 26 Oct 2011
136299 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 4 for SUSE® SLES 10 |
Product Description
The ETERNUS LT40 S2 is an ultra compact LTO tape library with up to 24 media slots and up to two drives. The systems are connected via SAS or FibreChannel interface to the server. The ETERNUS LT40 S2 magnetic tape systems family is optimized for low power consumption, the use of environmentally friendly materials, as well as high and easy scalability. The ETERNUS LT40 S2 is equipped with LTO technology, which is synonymous with high capacity, high speed and very low media costs. The tape library offers a storage capacity of 72 TB (LTO5 compressed) in just two height units. The base configuration includes 12 slots. Because all 24 slots are already built in, the other 12 slots can be easily activated via a software license. For further information visit: http://ts.fujitsu.com/products/storage/tape/eternus/
Tested Configuration:
| Host Bus Adapter: | LSI Logic
LSISAS1068E
, Serial SCSI (SAS) |
| Test Kit: | DiskKit 5.01.38 - 2010-07-20 |
Product File Specifications
| | | | | |
| | File Name: mptsas.ko | File Version: -1 |
| | File Date: 18-Mar-2011 | File Size: 93904 |
| | Checksum: aaa4a851751d4fe198683ef91694f133 |
| |
File URL: |
Config Notes
- The PLDP compliant LAN driver used during testing was installed from the following rpms: intel-e1000e-1.2.20-1.x86_64.rpm. These drivers can be downloaded and installed after the SLES install. To obtain the driver go to: http://drivers.suse.com/driver-process/pub/update/Intel/sle11sp1/common/x86_64/
- The SM712 video driver comes from Intel web site (S1200BTS on-board video driver)http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20001&lang=eng Please follow the steps below to install the driver: 1. Click Download to download the file smi-xserver-sm712-intel-2010119-R1.zip, choose I accept
when the pop window occur. 2. Unzip the file. 3. Copy the smi-xserver-sm712-intel.tgz to the SUT. 4. Unzip the file with command tar zxvf smi-xserver-sm712-intel.tgz. 5. Enter the directory: cd smi-xserver-sm712/sles11.1_64bit/ (this is for SLES11SP1 64bit. For i586, please use sles11.1_32bit instead). 6. Execute command : ./install. 7. After installation complete, type command init 3. 8. Put in the user name and password when enter the CLI interface. 9. Then input init 5 to enter the GUI interface again. Then the driver can be successfully installed.
|
Adapters and Drivers
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
FTS PDG ST
Heinz-Nixdorf-Ring 1
Paderborn
33106
GERMANY
|