ETERNUS LT20 S2 LTO4 SAS HH

File Name: mpt2sas.ko

File Version: -1

File Date: 20-May-2010

File Size: 216504

Checksum: 4f4d893c3e89e8f971c1ed835b470a5c

ETERNUS LT20 S2 LTO4 SAS HH
TAPE DRIVE
Hewlett-Packard Company

03 Aug 2011
135955

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 11 for Intel® Itanium® Processor Service Pack 1 for SUSE® SLES 11

Product Description
The ETERNUS LT20 S2 is an ultra compact LTO tape library with 8 media slots and one drive. The systems are connected via SAS or FibreChannel interface to the server. The ETERNUS LT20 S2 magnetic tape systems family is optimized for low power consumption, the use of environmentally friendly materials, as well as high and easy scalability. The ETERNUS LT20 S2 is equipped with LTO technology, which is synonymous with high capacity, high speed and very low media costs. The tape library offers a storage capacity of 24 TB (LTO5 compressed) in just one height unit. For further information visit: http://ts.fujitsu.com/products/storage/tape/eternus/

Tested Configuration:

Host Bus Adapter:	LSI Logic LSISAS2008 , Serial SCSI (SAS)
Test Kit:	DiskKit 5.01.38 - 2010-07-20

Product File Specifications

HBA Driver:

Config Notes

Install: The SLES install was performed using a virtual DVD device.
The driver htc-hfcldd.ko used during testing is SUSE SolidDriver Program compliant. The driver was installed from the driver package "htc-hfcldd-kmp-default-4.11.18.3038_3.0.76_0.11-2.sles11sp3.x86_64.rpm". To obtain the driver package log onto : https://portal.hds.com. The Hitachi customer has to be a member of "HDS support portal"to access the driver for download. Driver package can be installed after the SLES installation.
The be2net.ko is SUSE SolidDriver Program compliant. The driver was installed from the following DUD: elx-be2net_10.2.469.0-be2iscsi_10.2.473.0-lpfc_10.2.469.0-sles11sp3-1.iso on drivers.suse.com. This driver can be downloaded and installed during the SLES install. To obtain the driver go to: https://drivers.suse.com/driver-process/pub/update/Emulex/sle11sp3/common/DUD/dud_elx-be2net_10.2.469.0-be2iscsi_10.2.473.0-lpfc_10.2.469.0-sles11sp3/
The megaraid_sas.ko is SUSE SolidDriver Program compliant. The driver was installed from the following rpm: lsi-megaraid_sas-kmp-default-06.703.06.00_3.0.76_0.11-4.1.x86_64.rpm on drivers.suse.com. This driver can be downloaded and installed during the SLES install. To obtain the driver go to: https://drivers.suse.com/driver-process/pub/update/LSI/sle11sp3/common/x86_64/

Adapters and Drivers


LSI Logic LSISAS2008

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Hewlett-Packard Company
Industry Standard Server Division
20555 SH249
Houston , TX 77070
Website: http://www.hp.com

573172

ETERNUS LT20 S2 LTO4 SAS HH - Yes Bulletin 135955 | SUSE