|
 | ProLiant BL490c G7 3.06GHz Six Core
Network Server
IBM | 14 Feb 2011
134647 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 4 for SUSE® SLES 10 |
Product Description
For more information please visit http://www.hp.com/go/proliantlinux
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | G7 |
| BIOS/uEFI: | I28 12/01/2010 |
| CPU: | 2 Intel
Xeon® Processor X5675 3.06 GHz |
| RAM: | 16 GB |
| Ports and Bus Types: | 2 PCI Express X8 Serial 3 USB Ports |
| Video Adapter: | Matrox®
G200eH |
| Host Bus Adapter: | Intel
Integrated 82801JIR (ICH10R)
, Serial ATA (SATA) |
| Hard Disk Drive: | HP
MK0060EAVDR
, Serial ATA (SATA) |
| Floppy Type: | NONE |
| Test Kit: | System Certification Kit 6.6.0-34.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- SR-IOV/PCI Pass-through: Current system configuration does not support network SR-IOV or network PCI pass-through.
- System support: Please note that for full support on the listed OS release a special SUSE support contract is necessary.
|
Referenced Bulletins
147822
Adapters and Drivers
| | | | | |
| Matrox®
G200eH |
| | Driver Type: Video Driver | Driver Name: fbdev_drv.so |
| | Driver Date: 22-Apr-2008 | Driver Size: 18328 |
| | Checksum: 57f8381d876d1d46b1306a2e881dfe75 |
|
| HP
NC553i Dual Port 10Gb Network Adapter |
| | Driver Type: LAN Driver | Driver Name: be2net.ko |
| | Driver Date: 15-Jun-2010 | Driver Size: 77969 |
| | Checksum: 8f947d4f3eac526219eca8887d8d45a1 |
|
| Intel
Integrated 82801JIR (ICH10R) |
| | Driver Type: HBA Driver | Driver Name: ata_piix.ko |
| | Driver Date: 05-Sep-2009 | Driver Size: 38728 |
| | Checksum: 0570b3a7035f99e94edbcf12f33799db |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|