|
 | ProLiant BL490c G7 3.06GHz Six Core
Network Server
IBM | 14 Feb 2011
134646 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® Linux Enterprise Desktop 11 for x86
Service Pack 2 for SUSE® SLED 11 |
Other Products:
|
SUSE® LINUX Enterprise Point of Service (SLEPOS) |
Product Description
For more information please visit http://www.hp.com/go/proliantlinux
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | G7 |
| BIOS/uEFI: | I28 12/01/2010 |
| CPU: | 2 Intel
Xeon® Processor X5675 3.06 GHz |
| RAM: | 16 GB |
| Ports and Bus Types: | 2 PCI Express X8 Serial 3 USB Ports |
| Video Adapter: | Matrox®
G200eH |
| Host Bus Adapter: | Intel
Integrated 82801JIR (ICH10R)
, Serial ATA (SATA) |
| Hard Disk Drive: | HP
MK0060EAVDR
, Serial ATA (SATA) |
| Floppy Type: | NONE |
| Test Kit: | System Certification Kit 6.6.0-34.1 |
Config Notes
- Power Management: System/Processor does not support dynamic CPU frequency scaling.
- Kdump: system boot parameter "crashkernel=" was set to 128M during certification testing.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eH |
| | Driver Type: Video Driver | Driver Name: fbdev_drv.so |
| | Driver Date: 26-Feb-2009 | Driver Size: 22724 |
| | Checksum: bdcfb013d895d4f79023d47f1da6bd71 |
|
| HP
NC553i Dual Port 10Gb Network Adapter |
| | Driver Type: LAN Driver | Driver Name: be2net.ko |
| | Driver Date: 18-Jun-2010 | Driver Size: 61208 |
| | Checksum: 33573d9db5e0285cd789381a0e25e5cc |
|
| Intel
Integrated 82801JIR (ICH10R) |
| | Driver Type: HBA Driver | Driver Name: ata_piix.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 26820 |
| | Checksum: 7a92dea337a702c11024dde1a0356d5c |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|