UCS B200 M2

UCS B200 M2
Network Server
Fujitsu

22 Sep 2010
133641

SUSE YES Certified for the following products:
Operating Systems:

SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 4 for SUSE® SLES 10

Product Description
UCS B200 M2, http://www.cisco.com/en/US/products/ps10915/index.html

Tested Configuration:

Computer Type:	Blade Module
Mother Board Revision:	20
BIOS/uEFI:	S5500.1.3.1d.0.082020101218
CPU:	2 Intel Xeon® Processor X5680 3.33 GHz
RAM:	96 GB
Ports and Bus Types:	2 PCI Express X8
Video Adapter:	Matrox® MGA G200e
Host Bus Adapter:	LSI Logic SAS1064E PCI-Express Fusion-MPT , Serial SCSI (SAS)
Hard Disk Drive:	Seagate® ST9300603SS Savvio® 10K.3 6-Gb/s 300-GB , Serial SCSI (SAS) Seagate® ST973451SS , Serial SCSI (SAS)
Test Kit:	System Certification Kit 6.6.0-34.1

Config Notes

Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: https://www.suse.com/support/kb/doc.php?id=3374462.
Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 as this functionality is provided by the POWER8 hardware itself.
Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse
* System configuration: Did not have GPU installed when it runs on PowerVM, https://www-03.ibm.com/systems/power/hardware/s824l/index.html#details

Adapters and Drivers


Matrox® MGA G200e
	Driver Type: Video Driver	Driver Name: mga_drv.so
	Driver Date: 05-Sep-2009	Driver Size: 173128
	Checksum: 96a33dda383f3a9a0105217ce9af245a

Cisco 82598KR-CI
	Driver Type: LAN Driver	Driver Name: ixgbe.ko
	Driver Date: 05-Sep-2009	Driver Size: 209248
	Checksum: 623432283a3d7cfac5e61b37cc580f7e

LSI Logic SAS1064E PCI-Express Fusion-MPT
	Driver Type: HBA Driver	Driver Name: mptsas.ko
	Driver Date: 05-Sep-2009	Driver Size: 88496
	Checksum: 6008f1ab475edc8ffc35a67a6d71c096

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY
Voice: +49 (0)5251 525 2537
Website: http://ts.fujitsu.com/products/standard_servers/index.html

584736

UCS B200 M2 - Yes Bulletin 133641 | SUSE