|
 | BladeCenter LS42 (7902-62x)
Network Server
IBM | 20 Sep 2010
133616 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 10 |
Product Description
The LS42 blade server offers an energy-efficient design along with low-voltage processors, integrated memory controller and available solid-state drives to help keep power consumption down and reduce cooling demands in your data center. When workloads demand more performance, this blade server is ready to scale to four processors with the addition of a multi-processor expansion unit (MPE). Simply snap the MPE to the original blade and it becomes a 4-processor, 60 mm blade server with the additional performance you need.
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 3 |
| BIOS/uEFI: | L8E158AUS-1.05 |
| CPU: | 2 Intel
Xeon® Processor E5645 2.40 GHz |
| RAM: | 48 GB |
| Ports and Bus Types: | PCI Express X1 |
| Video Adapter: | Matrox®
G200eV |
| Host Bus Adapter: | IBM
ServeRAID-MR10i
, Serial SCSI (SAS) Intel
Integrated 82801JIB ICH10
, Serial ATA (SATA) |
| Hard Disk Drive: | 4 IBM
73.4 GB 15K RPM SAS HDD
, Serial SCSI (SAS) |
| CD/DVD: | TSST
TS-H353B DVD-ROM
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 6.6.0-34.1 |
Config Notes
- kISO Install: System was installed using the kISO ibmbe2netv2.iso. This kISO is required as an initial boot media to start the standard install process. The kISO can be downloaded from: http://http://drivers.suse.com/driver-process/pub/update/IBM/sle10sp4/sle10sp4be2netkiso/. One of the required updates in the kISO is the be2net network driver, this driver is PLDP compliant.
- Kdump: During the install using the ibmbe2netv2.iso kISO the following three modules must also be installed: kdump, kernel-kdump and kexec-tools. This is required to update the be2net driver to function with kdump.
- Hard Disk Configuration: RAID 5 with hot-spare.
|
Referenced Bulletins
137978
Adapters and Drivers
| | | | | |
| Matrox®
G200eV |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 04-Feb-2012 | Driver Size: 190688 |
| | Checksum: 9ec99a5b6850be782df01c0b7663d67f |
|
| Broadcom®
Integrated BCM5709C Dual-Port 10/100/1000BASE-T TOE PCI Express® Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: bnx2.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 123200 |
| | Checksum: 98580a3cc9f9f045befc4fa619c9cd70 |
|
| IBM
ServeRAID-MR10i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 127144 |
| | Checksum: 9064ff5d397905a2741116667bdcf91a |
|
| Intel
Integrated 82801JIB ICH10 |
| | Driver Type: HBA Driver | Driver Name: ata_piix.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 48216 |
| | Checksum: d67bc19831738808520f9d881a3e9990 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|