|
 | IBM zEnterprise 196 z196 (2817)
Network Server
IBM | 23 Jul 2010
133123 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 11 |
Product Description
SLES-10 SP3-s390x on an IBM® zEnterprise™ System.
Tested Configuration:
| Computer Type: | System z Platform |
| Mother Board Revision: | n/a |
| BIOS/uEFI: | n/a |
| CPU: | IBM
System z processor running 64 bit mode |
| RAM: | 4 GB |
| Ports and Bus Types: | System z |
| Host Bus Adapter: | IBM
Escon
, FibreChannel IBM
SCSI/FCP
, SCSI IBM
Ficon Express4
, FibreChannel IBM
Ficon Express8
, FibreChannel |
| Hard Disk Drive: | IBM
SCSI/FCP Disk Storage Device
, SCSI IBM
ECKD DASD Storage Device
, FibreChannel IBM
FICON DASD Storage Device
, FibreChannel |
| Test Kit: | System Certification Kit 6.6.0-34.1 |
Config Notes
- Install: System installed using external USB connected DVD drive; the OS was installed using the UEFI boot loader and system configuration.
- Maintenance update: SLES 11 SP3 Linux kernel 8525 (Patch: slessp3-kernel-8525) maintenance update is required and was installed during certification testing.
- Power management: Sleep / Suspend to RAM / ACPI S3 is supported on this system. The command used to suspend the machine was "pm-suspend s3-mode".
|
Referenced Bulletins
140813
Adapters and Drivers
| | | | | |
| IBM
Escon |
| IBM
SCSI/FCP |
| IBM
Ficon Express4 |
| IBM
Ficon Express8 |
| IBM
OSA-Express2 |
| IBM
OSA-Express3 |
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|