|
 | HP Integrity rx2660 PCI-X
Network Server
Hewlett-Packard Company | 12 Jul 2010
132974 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for Intel® Itanium® Processor Service Pack 1 for SUSE® SLES 11 |
Product Description
The Integrity rx2660 Server is built to deliver business-critical computing capabilities and UNIX® strengths whether yours is a small- to medium-sized business or a large enterprise.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | AB419-600002 |
| BIOS/uEFI: | 4.11 |
| CPU: | Intel
Dual-Core Itanium® 2 Processor 9040 1.60 GHz |
| RAM: | 1 GB |
| Ports and Bus Types: | 64-bit/133MHz PCI-X 2 64-bit/266Mhz PCI-X V2 |
| Host Bus Adapter: | LSI Logic
LSISAS 1068
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 HP
DH072ABAA6 72GB SAS
, Serial SCSI (SAS) HP
Logical Volume (Raid 5)
, Serial SCSI (SAS) |
| Test Kit: | Partner certified 1.1 |
Config Notes
- The PLDP compliant LAN driver used during testing was installed from the following rpms: intel-e1000e-1.2.20-1.i586.rpm. These drivers can be downloaded and installed after the SLES install. To obtain the driver go to: http://drivers.suse.com/driver-process/pub/update/Intel/sle11sp1/common/i586/
- The SM712 video driver comes from Intel web site (S1200BTS on-board video driver)http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20001&lang=eng Please follow the steps below to install the driver: 1. Click Download to download the file
smi-xserver-sm712-intel-2010119-R1.zip, choose I accept
when the pop window occur. 2. Unzip the file. 3. Copy the smi-xserver-sm712-intel.tgz to the SUT. 4. Unzip the file with
command tar zxvf smi-xserver-sm712-intel.tgz. 5. Enter the directory: cd smi-xserver-sm712/sles11.1_64bit/ (this is for SLES11SP1 64bit. For i586, please use sles11.1_32bit instead). 6. Execute command : ./install. 7. After installation complete, type
command init 3. 8. Put in the user name and password when enter the CLI interface. 9. Then input init 5 to enter the GUI interface again. Then the driver can be successfully installed.
|
Adapters and Drivers
| | | | | |
| Broadcom®
NetXtreme BCM5704 Gigabit |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 20-May-2010 | Driver Size: 394384 |
| | Checksum: e762c8435e6ed192d2b4450962fac9b3 |
|
| LSI Logic
LSISAS 1068 |
| | Driver Type: HBA Driver | Driver Name: mptsas.ko |
| | Driver Date: 20-May-2010 | Driver Size: 175640 |
| | Checksum: e4e547e2a271092ab0dd7e82287ec872 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Hewlett-Packard Company
Industry Standard Server Division
20555 SH249
Houston
, TX
77070
Website: http://www.hp.com
|