|
 | BladeCenter LS42 (7902-62x)
Network Server
Hewlett-Packard Company | 06 Jul 2010
132926 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 10 |
Other Products:
| Novell® Open Enterprise Server 2 Support Pack 3 |
Product Description
The LS42 blade server offers an energy-efficient design along with low-voltage processors, integrated memory controller and available solid-state drives to help keep power consumption down and reduce cooling demands in your data center.
When workloads demand more performance, this blade server is ready to scale to four processors with the addition of a multi-processor expansion unit (MPE). Simply snap the MPE to the original blade and it becomes a 4-processor, 60 mm blade server with the additional performance you need.
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 3 |
| BIOS/uEFI: | L8E158AUS-1.05 |
| CPU: | 4 AMD
Six-Core AMD Opteron™ 8435 2.60 GHz |
| RAM: | 48 GB |
| Ports and Bus Types: | PCI Express X1 |
| Video Adapter: | ATI
ES1000 |
| Host Bus Adapter: | LSI Logic
SAS1064E PCI-Express Fusion-MPT
, Serial SCSI (SAS) |
| Hard Disk Drive: | IBM
73.4GB 10K 2.5
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 6.6.0-34.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Hard Disk Configuration: JBOD
- VM Driver Pack: All FV guests were tested with PV drivers installed. The SLES drivers are included with the OS. The Windows 2012 drivers are available from https://download.suse.com/ (VMDP-WIN-2.2.exe).
- PCI Network Pass-Through: System was tested using PCI pass-through where a network adapter was given to the SLES 11 SP3 x86-64 guest. One of the embedded Emulex Corporation OneConnect 10Gb Ethernet Adapter adapters was used in this testing.
- Serial/USB/VGA port(s): provided through KVM connector console breakout cable which supplies one RS232 serial port, one VGA port and two USB ports. The system also has one internal USB port.
- Maintenance updates: The Linux Kernel 136 (patch SUSE-SLE-SERVER-12-2015-21) updates are required and were installed during certification testing.
|
Adapters and Drivers
| | | | | |
| ATI
ES1000 |
| | Driver Type: Video Driver | Driver Name: radeon_drv.so |
| | Driver Date: 29-Mar-2010 | Driver Size: 720064 |
| | Checksum: 392237aeb0878c4fe6de3c5728a9c319 |
|
| 2 Broadcom®
Integrated 5709s NetXtreme Gigabit Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: bnx2.ko |
| | Driver Date: 20-May-2010 | Driver Size: 118712 |
| | Checksum: 310235af077333686b82d4999c00a232 |
|
| LSI Logic
SAS1064E PCI-Express Fusion-MPT |
| | Driver Type: HBA Driver | Driver Name: mptsas.ko |
| | Driver Date: 20-May-2010 | Driver Size: 104480 |
| | Checksum: d10fc288bccf2085b063ce9ad8f72687 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Hewlett-Packard Company
Industry Standard Server Division
20555 SH249
Houston
, TX
77070
Website: http://www.hp.com
|