|
 | System z10 EC (2097)
Network Server
IBM | 19 May 2010
132069 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 11 |
Product Description
SLES-11 SP1 on s390x with up to 64 processors
Tested Configuration:
| Computer Type: | zSeries Platform |
| Mother Board Revision: | N/A |
| BIOS/uEFI: | N/A |
| CPU: | IBM
zSeries processor running 64 bit mode |
| RAM: | 2 GB |
| Ports and Bus Types: | zSeries |
| Host Bus Adapter: | IBM
Ficon Express4
, FibreChannel IBM
Ficon Express2
, FibreChannel IBM
Ficon Express
, FibreChannel IBM
Escon
, FibreChannel IBM
SCSI/FCP
, SCSI |
| Hard Disk Drive: | IBM
FICON DASD Storage Device
, FibreChannel IBM
ECKD DASD Storage Device
, FibreChannel IBM
SCSI/FCP Disk Storage Device
, SCSI |
| Test Kit: | System Certification Kit 6.6.0-17.1 |
Config Notes
- Kdump: Yast2 - Kernel kdump - kdump memory was increased from 128 to 256 MB for kdump to function.
- Install: System installed using the internal DVD drive; the OS was installed from DVD using the UEFI boot loader and system configuration.
- System was configured as 2-node scalable partition.
- Hard Disk Configuration: RAID 0, RAID 1 and RAID 5.
|
Adapters and Drivers
| | | | | |
| IBM
OSA-Express3 |
| IBM
Ficon Express4 |
| IBM
Ficon Express2 |
| IBM
Ficon Express |
| IBM
Escon |
| IBM
SCSI/FCP |
| IBM
OSA-Express2 |
| IBM
OSA-Express |
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|