|
 | ProLiant BL460c G6 2.93GHz Six Core
Network Server
IBM | 18 May 2010
132029 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for IBM zSeries® Service Pack 1 for SUSE® SLES 11 |
Virtual Machines (Guests OS):
|
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Fully Virtualized |
|
NetWare 6.5 |
|
SP:
Support Pack 8 for NetWare 6.5 |
Arch:
32 |
Mode:
Paravirtualized |
|
Windows 2003 Server R2 |
|
SP:
Service Pack 2 for Windows 2003 |
Arch:
32 |
Mode:
Fully Virtualized |
Product Description
For more information, please visit http://www.hp.com/go/proliantlinux
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | G6 |
| BIOS/uEFI: | I24 - 03/30/2010 |
| CPU: | 2 Intel
Xeon® Processor X5670 2.93 GHz |
| RAM: | 192 GB |
| Ports and Bus Types: | 3 USB Ports 2 PCI Express X8 Serial |
| Video Adapter: | ATI
Integrated RN50 |
| Host Bus Adapter: | HP
Smart Array P410i Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 HP
DG146ABAB4 146GB SAS 10K
, Serial SCSI (SAS) |
| Floppy Type: | NONE |
| Test Kit: | System Certification Kit 6.5.0-0.30 |
Config Notes
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 as this functionality is provided by the POWER8 hardware itself.
- Required configuration: SLES 11 SP3 will run in POWER7 Compatibility mode. 'Compatibility mode' simply means that the POWER8 processor with SMT8 will act as though it were a POWER7 processor with SMT4.
- SUSE update ISO: The SLES-11-SP3-MINI-ISO-power8.iso is SUSE SolidDriver Program compliant. This update must be downloaded and used before SUSE Linux Enterprise Server install. To obtain the driver go to: http://drivers.suse.com/ibm/IBM-POWER/sle11-sp3/install-readme.html and review the installation instructions.
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: http://www.novell.com/support/kb/doc.php?id=3374462.
|
Adapters and Drivers
| | | | | |
| ATI
Integrated RN50 |
| | Driver Type: Video Driver | Driver Name: radeon_drv.so |
| | Driver Date: 25-Feb-2009 | Driver Size: 605728 |
| | Checksum: 7206f6384c3ece573e2f36326d02bf0d |
|
| 2 HP
NC532i Dual-port 10Gb Multifunction |
| | Driver Type: LAN Driver | Driver Name: bnx2x.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 585568 |
| | Checksum: 7d9850394d4a6bd8a8561bf8ed56dfe5 |
|
| HP
Smart Array P410i Controller |
| | Driver Type: HBA Driver | Driver Name: cciss.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 99360 |
| | Checksum: 8168c0181e1b586f9af4e14bf3cb8fa8 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this configuration, please visit:
http://www.ibm.com/systems/z/hardware/
|