|
 | UCS C210 M2
Network Server
Atos | 16 Apr 2010
131696 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for IBM Power™ Service Pack 4 for SUSE® SLES 11 |
Product Description
UCS C210 M2,
http://www.cisco.com/en/US/products/ps10889/index.html
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 2.0 |
| BIOS/uEFI: | C200.1.1.1a.0 (Build Date: 03/29/2010) |
| CPU: | 24 IBM
POWER8 3.52 GHz |
| RAM: | 96 GB |
| Ports and Bus Types: | 5 PCI Express X8 2 USB Ports Serial |
| Host Bus Adapter: | IBM
Obsidian-E PCI-E SCSI Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Hitachi GST
HUC101212CSS600
, Serial SCSI (SAS) |
| CD/DVD: | IBM
slim line DVD - RMB00140592
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 6.5.0-0.30 |
Config Notes
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 as this functionality is provided by the POWER8 hardware itself.
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: http://www.novell.com/support/kb/doc.php?id=3374462.
|
Referenced Bulletins
143509
Adapters and Drivers
| | | | | |
| Broadcom®
BCM5719 X4 PCI Express® Quad-Port Gigabit Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 24-Jun-2015 | Driver Size: 295567 |
| | Checksum: eeb2b915b992f930d874697d247b3b11 |
| | Driver Version: 3.137 |
|
| IBM
Obsidian-E PCI-E SCSI Controller |
| | Driver Type: HBA Driver | Driver Name: ipr.ko |
| | Driver Date: 24-Jun-2015 | Driver Size: 221527 |
| | Checksum: a3c9af9381086229aa0eb35f1efcede9 |
| | Driver Version: 2.6.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Atos
River Ouest 80, Quai Voltaire
95877 Bezons
FRANCE
|