|
 | ProLiant BL2x220c G6 2.93GHz Six Core
Network Server
SGI | 31 Mar 2010
131590 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 10 |
Product Description
For more information, please visit http://www.hp.com/go/proliantlinux
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | G6 |
| BIOS/uEFI: | I26 3/1/2010 |
| CPU: | 2 Intel
Xeon® Processor X5670 2.93 GHz |
| RAM: | 96 GB |
| Ports and Bus Types: | USB Ports |
| Video Adapter: | ATI
ES1000 |
| Host Bus Adapter: | Intel
Integrated 82801JIB ICH10
, Serial ATA (SATA) |
| Hard Disk Drive: | Fujitsu
MHZ2250BS
, Serial ATA (SATA) |
| Floppy Type: | NONE |
| Test Kit: | System Certification Kit 6.5.0-0.30 |
Config Notes
- Kdump (SLE15): the crash kernel reserved memory parameters were increased from the default to crashkernel=239M,high crashkernel=132M,low using YaST.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to the SLES 15 FV guest. One of the integrated Ethernet Connection X722 for 1GbE adapters was used in this testing.
- Install: System installed using PXE network install; the OS was installed using the UEFI boot loader and system configuration. Disk configuration: two HDD configured as RAID 0 and M.2 boot device configured with two SSDs configured as RAID 0.
|
Referenced Bulletins
146892
Adapters and Drivers
| | | | | |
| ATI
ES1000 |
| | Driver Type: Video Driver | Driver Name: radeon_drv.so |
| | Driver Date: 25-Feb-2009 | Driver Size: 605728 |
| | Checksum: 7206f6384c3ece573e2f36326d02bf0d |
|
| HP
NC362i Dual Port Gigabit Server Adapter |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 116120 |
| | Checksum: 384f7df9f6046f20813724fd8b777e72 |
|
| Intel
Integrated 82801JIB ICH10 |
| | Driver Type: HBA Driver | Driver Name: ata_piix.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 37888 |
| | Checksum: f81281db8221f758e7111cd80015aebe |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
SGI
46600 Landing Parkway
Fremont
, CA
94538
Voice: 650-960-1980
Website: http://www.sgi.com
|