|
 | SGI® Octane III™ OC3-2TY12
Network Server
Hewlett-Packard Company | 11 Jan 2010
131091 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® Linux Enterprise Desktop 11 for x86
Service Pack 1 for SUSE® SLED 11 |
Product Description
SGI® Octane™ III OC3-2TY12 graphics workstation capitalizes on advanced graphics capabilities. Conceived, designed and built by SGI on the shoulders of its workstations from the past, Octane III is available as a single-node dual-socket graphics workstation with support for fast graphics and GP-GPU cards to take high-performance graphics into the 21st century. Octane III is optimized for use with multiple display solutions for expanded advanced visual computing scenarios.
Tested Configuration:
| Computer Type: | Pedestal |
| Mother Board Revision: | 1.3 |
| BIOS/uEFI: | AMI V080016 10/29/2009 |
| CPU: | 2 Intel
Xeon® Processor X5570 2.93 GHz |
| RAM: | 48 GB |
| Ports and Bus Types: | 2 PCI Express X16 PCI Express X4 2 USB Ports Serial |
| Video Adapter: | NVIDIA®
Quadro® FX 5800 |
| Host Bus Adapter: | Intel
Integrated 82801JIB ICH10
, Serial ATA (SATA) LSI Logic
LSI SAS 1064E
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Seagate®
ST373455SS
, Serial SCSI (SAS) |
| CD/DVD: | Matsushita
DVD-RAM UJ880AS
, Serial ATA (SATA) |
| Floppy Type: | NONE |
| Test Kit: | System Certification Kit 6.5.0-0.30 |
Config Notes
- Graphics: Video driver used in testing is PLDP-compliant and may be installed by adding http://download.nvidia.com/novell/sle11sp1 as an Add-On Product.
- Graphics: nvidia-settings used to enable/disable external display. Fn+F4 does not switch displays.
- Power Management: xhci module (for USB 3.0) is experimental and prevents resume from S3/S4 states. Suggested solution: Prevent loading of xhci by adding the line "blacklist xhci" to the /etc/modprobe.d/blacklist file. If the xhci module is needed, it may be force-unloaded when entering S3/S4 by specifying SUSPEND_MODULES="xhci" in a file under /etc/pm/config.d. Any USB 3.0 devices should be unmounted before force-unloading the xhci module.
|
Adapters and Drivers
| | | | | |
| 2 Intel
82576 Gigabit Ethernet Controller (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 116120 |
| | Checksum: 384f7df9f6046f20813724fd8b777e72 |
|
| Intel
Integrated 82801JIB ICH10 |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 57264 |
| | Checksum: e8a95d74b2f76b30706e49b9f192fa60 |
|
| LSI Logic
LSI SAS 1064E |
| | Driver Type: HBA Driver | Driver Name: mptsas.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 89736 |
| | Checksum: a305bf04c07867149c163920c96006ae |
|
| NVIDIA®
Quadro® FX 5800 |
| | Driver Type: Video Driver | Driver Name: fbdev_drv.so |
| | Driver Date: 25-Feb-2009 | Driver Size: 28136 |
| | Checksum: ec06ff15b3bf839e0751913c04aa513f |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Hewlett-Packard Company
Personal Systems Group - Notebooks
20555 SH249
Houston
, TX
77070
Website: http://www.hp.com
|