|
 | TOSHIBA e-STUDIO167/207/237
Printer
IBM | 07 Dec 2009
130897 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 3 for SUSE® SLES 11 |
Product Description
Laser Copier/Printer
Tested Configuration:
| CPU: | 2 Intel
Xeon® Processor E5504 2.00 GHz |
| Video Adapter: | Matrox®
MGA G200 VE |
| Host Bus Adapter: | LSI Logic
SAS1064ET PCI-Express Fusion-MPT
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 IBM
73GB 15K 6Gbps SAS 2.5 SFF Slim-HS HDD
, Serial SCSI (SAS) |
| Test Kit: | Printer Tests v4.10 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Tested as a 2-node scalable partition with 8 Compute Books. Hard disk configuration: tow separate RAID 0.
- Kdump: the crash kernel reserved memory parameters were increased from the default to "crashkernel=190M,high crashkernel=132M,low" using YaST.
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200 VE |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 04-Feb-2012 | Driver Size: 190688 |
| | Checksum: 9ec99a5b6850be782df01c0b7663d67f |
|
| Broadcom®
Integrated BCM5709S Dual-Port 1000/2500BASE-X PCI Express Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: bnx2.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 123200 |
| | Checksum: 98580a3cc9f9f045befc4fa619c9cd70 |
|
| LSI Logic
SAS1064ET PCI-Express Fusion-MPT |
| | Driver Type: HBA Driver | Driver Name: mptsas.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 110008 |
| | Checksum: f58c58745e32babd011e4c9cd94f691b |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|