|
 | Kyocera FS-4025DN KX
Printer
Kyocera Mita Corporation | 01 Dec 2009
130851 |
SUSE YES Certified for the following products:
Operating Systems:
| NetWare® 6.5 Support Pack 8 for NetWare® 6.5 |
Product Description
Kyocera Mita, a manufacturer of printers and digital MFPs, introduces our next generation printing system, Kyocera FS-4025DN KX. Kyocera FS-4025DN KX is a 45 PPM black and white laser printer. Please visit our website to find a dealer near you.
Tested Configuration:
| Test Kit: | Printer Tests v5.0 |
Config Notes
- VM Driver Pack: All guests were tested with PV drivers installed. The SLES 11 SP3 drivers are included with the OS. The Windows 2012 R2 drivers are available from http://download.novell.com (VMDP-WIN-2.1.exe), using the virtio driver for testing.
- Tested as a 2-node scalable partition with 8 Compute Books. Hard disk configuration: RAID 0 and RAID 1.
- SUSE Driver Kit: The ibm_x6-sle11sp3-x86_64 driver kit is SUSE SolidDriver Program compliant. The driver kit was installed during the SLES install process as an initial bootable iso image. This driver must be downloaded and installed before the SLES install. To obtain the driver go to: http://drivers.suse.com/ibm/IBM-X6/sle11-sp3/install-readme.html.
- Install: System installed using an external USB DVD drive; the OS was installed from DVD using the UEFI boot loader and elilo system configuration.
- PCI Network Pass-Through: System was tested using PCI pass-through where two of the host network adapters were given, one each, to a SLES 11 SP3 i586 and SLES 11 SP3 x86-64 guests. Two of the Intel® I350-T4 ML2 Quad Port GbE Adapters were used for this testing.
- Kdump: the crash kernel reserved memory parameter in the elilo.conf file was changed from 128 to 256 (crashkernel:512M-:256M) for kdump to function correctly.
|
Referenced Bulletins
141626
Adapters and Drivers
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Kyocera Mita Corporation
2-28, 1-Chome, Tamatsukuri, Chuo-ku
Osaka
540-8585
JAPAN
Voice: +81-6-6764-3555
Fax: +81-6-6764-3980
Website: www.kyoceramita.com
|