|
| Cisco B200 M1
Network Server
Unisys Corporation | 29 Oct 2009
130618 |
SUSE YES Certified for the following products:
Product Description
Cisco UCS B200 M1 Blade Server
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 1.0 |
| BIOS/uEFI: | S5500.86B.1.1.36-103.102620092027 |
| CPU: | 2 Intel
Xeon® Processor X5570 2.93 GHz |
| RAM: | 96 GB |
| Ports and Bus Types: | PCI Express X8 |
| Video Adapter: | Matrox®
MGA G200e |
| Host Bus Adapter: | LSI Logic
SAS1064E PCI-Express Fusion-MPT
, Serial SCSI (SAS)
Cisco
CNA M71KR-Q
, FibreChannel |
| Hard Disk Drive: | 2 Fujitsu
MBD2300RC
, Serial SCSI (SAS) |
| Storage Area Network (SAN) Device: | EMC
Symmetrix / DMX |
| USB Keyboard: | Cisco virtual Device |
| USB Mouse: | Cisco virtual Device |
| Test Kit: | System Certification Kit 6.4.0-0.21 |
Config Notes
- The s-Par® firmware version is 4.2.18.26479 (2015-04-28)
- Install: System booted to DVD, and OS installed via network.
- All listed drivers are SUSE SolidDriver compliant and are delivered as part of the Forward! by Unisys™ (PEPP) product.
|
Adapters and Drivers
| | | | | |
| Cisco
CNA M71KR - Q |
| | Driver Type: LAN Driver | Driver Name: ixgbe.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 117512 |
| | Checksum: 1a8950d8ed3249809478842a1527384a |
|
|
| LSI Logic
SAS1064E PCI-Express Fusion-MPT |
| | Driver Type: HBA Driver | Driver Name: mptsas.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 89736 |
| | Checksum: a305bf04c07867149c163920c96006ae |
|
|
| Cisco
CNA M71KR-Q |
| | Driver Type: HBA Driver | Driver Name: qla2xxx.ko |
| | Driver Date: 28-Feb-2009 | Driver Size: 319712 |
| | Checksum: dbe0300401ea8d97b525ce2c26827f0c |
| | Driver Version: 8.02.01.03.1 |
|
| Matrox®
MGA G200e |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 25-Feb-2009 | Driver Size: 201412 |
| | Checksum: 82bb390e7cef098e3160a754caeb9408 |
|
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Unisys Corporation
Unisys Way
Blue Bell
, PA
19424
Voice: 408-434-2600
Fax: 408-434-2688
Website: http://www.unisys.com
|