|
 | System z10 BC (2098)
Network Server
IBM | 22 Oct 2008
103275 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 9 for IBM zSeries® Service Pack 3 for SUSE® SLES 9 |
Product Description
SLES-9-s390x-SP3 on an IBM System z10 BC with up to 10 processors
Tested Configuration:
| Computer Type: | zSeries Platform |
| Mother Board Revision: | n/a |
| BIOS/uEFI: | n/a |
| CPU: | IBM
zSeries processor running 64 bit mode |
| RAM: | 750 MB |
| Ports and Bus Types: | zSeries |
| Host Bus Adapter: | IBM
SCSI/FCP
, FibreChannel IBM
Escon
, FibreChannel IBM
Ficon Express
, FibreChannel IBM
Ficon Express2
, FibreChannel IBM
Ficon Express4
, FibreChannel |
| Hard Disk Drive: | 2 IBM
ECKD DASD Storage Device
, FibreChannel IBM
SCSI/FCP Disk Storage Device
, FibreChannel IBM
FICON DASD Storage Device
, FibreChannel |
| Test Kit: | System Certification Kit 6.3.0-0.6 |
Config Notes
- Maintenance update: SLES 11 SP3 Xen maintenance update 8479 and xen kernel update 8525 x86-64 are required and were installed during certification testing.
- Install: System installed using the BladeCenter chassis DVD drive; the OS was installed from DVD using the UEFI boot loader and system configuration.
- Hard Disk Configuration: RAID 0.
- VM Driver Pack: All FV guests were tested with PV drivers installed. The SLES 11 SP3 drivers are included with the OS. The Windows 2012 R2 drivers are available from SUSE at http://download.novell.com (VMDP-WIN-2.1.exe).
|
Referenced Bulletins
140837
Adapters and Drivers
| | | | | |
| IBM
OSA-Express |
| IBM
SCSI/FCP |
| IBM
Escon |
| IBM
Ficon Express |
| IBM
Ficon Express2 |
| IBM
Ficon Express4 |
| IBM
OSA-Express2 |
| IBM
OSA-Express3 |
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this configuration, please visit:
http://www.ibm.com/systems/z/hardware/
|