 | PRIMERGY® RX100 S5
Network Server IBM | 07 Mar 2008
100647 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 10 |
Product Description
As business processes and customer bases grow and rely more on Internet technology, data centers face the challenge of rapid enhancements of their front end infrastructure services. Increasingly they are looking for a platform solution that has minimum impact on their budgets, yet is easy to deploy and simple to operate. That is where the RX100 S5 optimally fits in. With technical evolutions like Quad-Core Intel® Xeon® UP 3200/3300 series CPU, integrated SAS or SATA RAID 0, 1 data protection for up to 2x 3.5-inch "easy change" SATA or 2x 3.5-inch hot-plug SATA/SAS disks and 8 GB direct addressable memory the PRIMERGY RX100 S5 matches your business application requirements perfectly. It combines the benefits of cost-optimized SATA or SAS disk technology with a space-saving 1 U form factor of less than 60 cm in depth. This makes it easy to integrate into any rack enclosures. The standard iRMC S2 (integrated Remote Management Controller) offers enhanced system management and graphics based on IPMI 2.0 technology. Dual-Core Xeon® processors and an even more power saving Celeron® processor round off the offering alternatively. The set of integrated network and management functions make it a good choice for budget-sensitive infrastructure solutions. For more detailed information, please refer to the data sheet at: http://extranet.fujitsu-siemens.com/VIL/dmsp/9f/0d/ds_prim-rx100_s5.pdf
Tape Drive
| Product Name | PRIMERGY® RX100 S5 |
Tested Configuration
| Host Bus Adapter: | LSI Logic Onboard S-ATA RAID , Interface: Serial ATA (SATA) |
| Test Kit: | System Certification Kit 6.1.0-0.28 |
Config Notes
|
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com