|
| FibreCat® SX40
Disk Subsystem Enclosure
Fujitsu | 13 Aug 2009
126462 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
NetWare® 6.5
Support Pack 8 for NetWare® 6.5 |
Other Products:
Novell® Open Enterprise Server 2 Support Pack 1 - NetWare |
Product Description
The FibreCAT SX40 SAS storage subsystem is a passive,
directly connectable system for data storage or for expanding
the hard disk capacity of connected PRIMERGY servers. With
a height of 2U, the FibreCAT SX40 subsystem meets the
requirements for a compact design with high hard disk
capacity in 19-inch rack infrastructures.
The FibreCAT SX40 storage system with its SAS technology
enables flexible expansion with powerful and highly available
hard disks as storage requirements grow.
Up to 12 SAS and / or SATA hard disks offer a total maximum
capacity of 12 Tbytes in an external housing. Cascading of up
to 3 FibreCAT SX40s via the second SAS x4 port permits
expansion to a maximum of 36 Tbytes of external hard disk
capacity.
In the FibreCAT SX40 storage subsystem, the active
components hot-plug hard disks and hot-plug power supply
modules can be replaced while the server is running. The
redundant hot-plug power supply units can be connected with
phase redundancy via separate power lines. Optimum and
secure cooling of the hard disks is ensured by two
independent fans in each power supply unit.
For more detailed information please refer to the data sheet at:
http://docs.ts.fujitsu.com/dl.aspx?id=db952000-74e7-43d1-99b0-ce3995aaa7c3
Primary Driver File(s):
| | | | | |
| File Name: MEGA_SAS.HAM | File Version: 1.06e |
| File Date: 23-Aug-2007 | File Size: 31865 |
| Checksum: -1 |
|
File URL: |
| File Name: SCSIHD.CDM | File Version: 3.03j |
| File Date: 30-May-2008 | File Size: 34922 |
| Checksum: -1 |
|
File URL: |
Driver Support File(s)
| | | | | |
| File Name: MEGA_SAS.DDI | File Version: 1.06.05 |
| File Date: 23-Aug-2007 | File Size: 13956 |
| Checksum: -1 |
|
File URL: |
| File Name: SCSIHD.DDI | File Version: 3.08 |
| File Date: 16-Jan-2007 | File Size: 37658 |
| Checksum: -1 |
|
File URL: |
Disk Subsystem Enclosure
Product Name | FibreCat® SX40 |
Interface: | Serial SCSI (SAS) |
Tested Configuration:
Hard Disk Drive: | 3 Seagate®
ST3500320NS
, Interface: Serial ATA (SATA)
, Capacity: 500GB |
Host Bus Adapter: | LSI Logic
MegaRAID SAS 8880EM2
, Interface: Serial SCSI (SAS)
, Firmware: 1.4 |
System: | Fujitsu
PRIMERGY® TX200 S5 |
Test Kit: | Diskkit 4.05.11 - 04-23-2007 |
Config Notes
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
TSP x86 E QA 1
Bürgermeister-Ulrich-Strasse 100
Augsburg
86199
GERMANY
Voice: +49 (0)821 804-2987
Website: http://ts.fujitsu.com/products/standard_servers/index.html
|