System does not boot anymore after extending root filesystem
This document (7022440) is provided subject to the disclaimer at the end of this document.
SUSE Linux Enterprise Server 12 - System Z (s390x)
After adding a disk volume to the volume group of the root filesystem, or in case of btrfs, to the root filesystem itself, the root filesystem cannot be mounted on next IPL. Systemd endlessly prints messages similar to A start job is running for dev-disk...ab12cdef.device (60s / no limit).
After adding the additional disk and before restarting the system, grub2 and the initrd need be updated so it will set the additional disk volume online. The following commands will do that:
In case the system was rebooted without recreating the grub2 bootloader and the initrd, the rescue system can be used to fix the issue.
Grub2 and the initrd will only set disk devices online that are needed to mount the root filesystem to avoid long waiting times when a large amount of disks are visible to the system. Thus, both need to be updated to contain the information that an additional disk is required. This affects only filesystems mandatory to start the installed system, for filesystems that get mounted afterwards this is not necessary.
This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:7022440
- Creation Date:
- Modified Date:20-Aug-2020
- SUSE Linux Enterprise Server
< Back to Support Search
For questions or concerns with the SUSE Knowledgebase please contact: tidfeedback[at]suse.com