How to use a BCM4311 based wireless chip with SLED11
This document (7004503) is provided subject to the disclaimer at the end of this document.
The package can be installed using the command
rpm -Uvh b43-fwcutter*rpm
To update the firmware, run as root the command
Afterwards reboot the system to have the hardware completely reinitialized. Using the Network-Manager applets available, you should be able to connect to wireless networks.
Please note that this information is based on user reports. As the b43-fwcutter RPM is not shipped with SLED11, SUSE Technical Services does not support this package.
Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
26: PCI 300.0: 0282 WLAN controller
Model: "Broadcom BCM4311 802.11b/g WLAN"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4311 "BCM4311 802.11b/g WLAN"
SubVendor: pci 0x14e4 "Broadcom"
SubDevice: pci 0x0465
Please see http://linuxwireless.org/en/users/Drivers/b43 for more information.
This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:7004503
- Creation Date: 23-Sep-2009
- Modified Date:10-Mar-2021
- SUSE Linux Enterprise Desktop
For questions or concerns with the SUSE Knowledgebase please contact: email@example.com