|
| PRIMERGY® TX300 S4
Network Server
Fujitsu | 21 Jul 2009
126285 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 1 for SUSE® SLES 10 |
Virtual Machines (Guests OS):
SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Paravirtualized |
SP:
Service Pack 1 for SLES 10 |
SUSE® LINUX Enterprise Server 10 for x86 |
|
Arch:
32pae |
Mode:
Paravirtualized |
SP:
Service Pack 1 for SLES 10 |
SUSE® LINUX Enterprise Server 9 for AMD64 & EM64T |
|
Arch:
64 |
Mode:
Fully Virtualized |
SP:
Service Pack 3 for SLES 9 |
SLES 9 for x86 |
|
Arch:
32 |
Mode:
Fully Virtualized |
SP:
Service Pack 3 for SLES 9 |
Windows 2003 Server R2 |
|
Arch:
64 |
Mode:
Fully Virtualized |
SP:
Service Pack 2 for Windows 2003 |
Product Description
Are you looking for business continuity, especially for your core business applications?
Our TX300 servers provide peace of mind when choosing a suitable server platform,
because their set of integrated redundancy and hot-plug features assures continuous
operation of the platform and thus high application reliability.
It is offering the breakthrough performance features of leading edge Intel® Dual-
/Quad-Core Xeon® CPUs embedded in a powerful design with
an 8-port SAS controller and fast PCIe links and PCI-X busses. Continuity is assured
with the optional hot-plug power supply, hot-plug redundant fans, modular RAID and
redundant dual LAN features. For your high capacity needs, PRIMERGY TX300
S4 provides up to 2 memory boards with 16 DIMM slots for hot-spare or memory
mirroring with up to 64 GB PC2-5300F (667 MHz) RAM memory for enhancing data
transfer throughput. And the system only needs a few additional options to meet the
highest demands, such as clustering or disaster-tolerant setup.
For business-critical remote sites, the PRIMERGY TX300 S4 is the right platform.
For more detailed information please refer to the data sheet at:
http://docs.ts.fujitsu.com/dl.aspx?id=1ee2d2d4-7ab5-4b60-80cf-d8a02299359a
Tested Configuration:
Computer Type: | Tower |
Mother Board Revision: | D2529 |
BIOS/uEFI: | 4.06 Rev. 1.00.2529 |
CPU: | 2 Intel
Quad-Core Xeon® Processor X5460 3.16 GHz |
RAM: | 8 GB |
Ports and Bus Types: | 4 USB Ports 2 PCI Express X8 4 PCI Express X4 64-bit/133MHz PCI-X Serial |
Video Adapter: | Matrox®
MGA G200e |
Host Bus Adapter: | Intel
Integrated 6321ESB ICH
, Serial ATA (SATA) LSI Logic
LSISAS1078E 8-port SAS Controller
, Serial SCSI (SAS) |
Hard Disk Drive: | 3 Seagate®
ST373454SS Cheetah 15.4-SAS
, Serial SCSI (SAS) |
CD/DVD: | LG
GSA-T30N
, Serial ATA (SATA) |
Floppy Type: | 1.44 |
Test Kit: | System Certification Kit 6.1.0-0.28 |
Config Notes
- This bulletin was released for changing vendor to Fujitsu. Please note
that for full support on the listed OS release a special support contract may
be necessary. The system is fully supported on the most current service pack release.
|
Referenced Bulletins
95618
Adapters and Drivers
| | | | | |
Matrox®
MGA G200e |
| Driver Type: Video Driver | Driver Name: mga_dri.so |
| Driver Date: 21-Sep-2006 | Driver Size: 2225396 |
| Checksum: f7cfd4651f6df6f658d7af87cd89120d |
|
2 Broadcom®
Integrated BCM5708C NetXtreme II GbE (Dual-port) controller |
| Driver Type: LAN Driver | Driver Name: bnx2.ko |
| Driver Date: 24-Nov-2007 | Driver Size: 150912 |
| Checksum: b8de048df6738a5f5650a1a28ab303ad |
|
Intel
Integrated 6321ESB ICH |
| Driver Type: HBA Driver | Driver Name: ata_piix.ko |
| Driver Date: 24-Nov-2007 | Driver Size: 31424 |
| Checksum: 1b0b93802188c3ebe662b57f1ccfd0ea |
|
LSI Logic
LSISAS1078E 8-port SAS Controller |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 24-Nov-2007 | Driver Size: 42744 |
| Checksum: 0de1f6979424156c8da3e3c768bc5357 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
TSP x86 E QA 1
Bürgermeister-Ulrich-Strasse 100
Augsburg
86199
GERMANY
Voice: +49 (0)821 804-2987
Website: http://ts.fujitsu.com/products/standard_servers/index.html
|